 |
|
 |
Pure Power that's
Ready to Roll
The new PowerSTAT Portable
Power Source consists of a pure sine wave-AC inverter
plus high capacity charger with a hefty battery pack,
all packaged in a convenient weather resistant portable
case. Just charge it up at any standard 120VAC power
outlet. |
Download
Printable PDF |
|
Take It Inside;
Take It Outside
|
 |
| Use PowerSTAT to provide
120-volt AC power indoors, where generators cannot run
safely. The weather resistant case allows for outdoor
operation as well. |
|
Quiet Operation
|
|
PowerSTAT produces virtually no noise when it is
charging up or providing power. |
|
Pure AC Electrical
Output
|
|
Run microprocessor-based devices such as computers
and even sensitive medical equipment on PowerSTAT’s pure sine-wave
output. |
|
Fresh Air
|
|
|
No fossil fuels are utilized, so there is no exhaust
or pollution produced. |
 |
|
The Fuel is
Electricity
|
|
PowerSTAT can function in emergencies when
electricity is available but fuels such as gasoline or diesel are in
short supply. |
|
High Capacity
|
|
Power a computer, refrigeration equipment or
telecommunications gear for up to a day, or even more, due to
PowerSTAT’s robust 160-AH battery pack and 1800-watt output. Runtime
depends upon the total wattage of the equipment that’s plugged in. |
|
|
Fast Turnaround
|
|
|
PowerSTAT recharges fully in about 10 hours at
any standard AC outlet (20A circuit). Much less time is required if
the unit is only partially discharged. This means you can shuttle
multiple units from powered to unpowered locations in an emergency
to maintain the operation of mission-critical equipment. |
|
|
Backup Power
|
|
|
PowerSTAT can serve as an online power backup for key
equipment. Should AC power drop, PowerSTAT kicks in instantly to
maintain the equipment’s operation. When AC power is restored,
PowerSTAT will charge its batteries automatically to get ready for
the next use. |
|
|
Better than a
Generator
|
|
|
Unlike many generators, PowerSTAT always starts. Its
power output lacks the noise inherent in electricity from generators
that can cause hum and static in electronic equipment. Its cost to
operate is almost zero, since expensive petroleum products are not
required. And run-time can be substantially longer than many
generators, which are limited by the size of their fuel tanks. |
|
|
Quote
|
|
|
Bill Baker
(616.772.2300, extension 102) can provide a formal quote.
Lease-to-own programs are available thru ISS as well.
Illustrated instruction manuals come
with PowerSTAT Portable Power Source, and ISS offers remote
technical support for the life of the product 24/7. |
|
|
|
|
|
Technical
Specifications
|
|
|
Modes of Operation |
Inline power supply. |
| |
Rechargeable battery/inverter system. |
|
Weight |
210 lbs. |
|
Case Size |
23" high by 28.25" wide by 30.5" deep (doors
on). |
| |
21" deep (doors off). |
|
Vibration |
Shock resistant. |
|
Mechanisms for Portability |
2 handles require 2 persons minimum to lift. |
| |
1 retractable tow handle and wheels require
one person to pull. |
|
2 Security Doors |
4 TSA latches each lockable. |
|
Moisture Tightness |
Water resistant. |
|
Max Electrical
Wattage/Amperage Output |
Continuous 2.0kW/15A @ 40° C max ambient. |
| |
Surge 4.5kW/37A for 5s. |
|
Electrical Wattage/Amperage
Input When Charging & When Idle (no load) |
Max 840W/7A. |
| |
Idle 60W/.5A. |
|
Battery Capacity in AH |
160AH. |
|
Number & Style of Batteries |
2 - M24 gel. |
|
Recharge Time with Fully
Discharged Batteries |
10 hours. |
|
Information Available on
Display |
AC voltages & amps in & out. |
| |
DC voltage & amps in & out. |
| |
Configuration details. |
|
Breakers & Fuses |
Output powers 15A. |
| |
Battery Breaker 300A. |
| |
Display panel fuse 1A AGC. |
|
Inverter/Charger |
CSA/NRTL approved to CSA 107.1, UL458
(including Marine Supplement) & UL1741. |
| |
Complies with ABYC recommended practices E-8,
E-9, A-20 & A-25 for marine use. |
| |
Compliance to KKK-A-1822D for use in
'Star-of-Life' ambulances, available on request. |
|
CERTIFICATION |
All components are UL listed. |
|
|
|
|
|
|
Electrical Charge Mode Specifications
|
|
|
AC Input
|
|
Operating Voltage Range |
90-135 VAC. |
|
Nominal Current |
15AAC at 100A charge, 120VAC in. |
|
Power Factor (100A charge, 120VAC in) |
≥
0.98 on sine input. |
|
Nominal Frequency |
60Hz. |
|
AC Output |
|
Outlet |
Duplex (1) medical grade. |
|
DC Output
|
|
Nominal Voltage |
12.0 VDC. |
|
Min Battery Voltage for Charging |
0.0VDC. |
|
Max Output Voltage |
17.5VDC. |
|
Nominal Output Current |
50A @
≤
15.0VDC. |
|
Equalize Mode Max Current |
≥
10A @
≤
17.5VDC. |
|
Charger Current Derating |
Automatically reduce charger current
as internal temperature exceeds 80◦
C, input VAC approaches low transfer and AC input
current approaches 80% of breaker setting. |
|
Efficiency at Nominal Output |
≥
84%. |
|
Other
|
|
Battery Type Settings |
Gel, flooded, AGM, Pb-Ca. |
|
Battery Size Settings |
50-2000 Ahr. |
|
Charge Algorithms |
Custom 3-stage with factory default
set points. Custom 2-stage as above. Manually
engaged, equalize, with factory defaults. CV/CC.
User programmable set points. |
|
Independent Battery Banks |
1. |
|
Temperature Range |
-20C to +60C - operating.*
-40C to +60C - storage.
*Derating above 40C. |
|
Battery Life |
4-5 years (750-1000 cycles). |
|
|
|
|
|
